Steering Control Unit Orbitrol Valve OSPB 100 ON Replacement DANFOSS 150N0041

NOTE: We issue VAT invoices for countries in the European Union. Our valve does not require an additional ankle (FKA Orbitrol pressure relief valve) between the orbitrol and the hydraulic lines.

You can connect the hydraulic lines directly to the orbitrol. If you are concerned that your hydraulic hoses will be too short, you can leave your old cube (overflow valve). Comparison numbers from other manufacturers. High quality replacement DANFOSS OSPB 100 ON. Orbitrol 100 with the ON (ON NORMAL) system, while the oil-filled steering wheel constantly circulates in the system and passes through the return line to the tank unhindered by the Orbitrol, the pump then works but is relieved. Connections: P, T, A, B internal thread [BSPP]: 1/2. Steering column mounting: 4x M10 screw - 16mm.

Valve setting: overflow 160bar, bumper 220bar. Geometric volume: 100 cm3 / rev. Recommended oil flow in the system: from 8 to 12 l / min. Upon customer request, we can also equip Orbitrol with adapters for hydraulic hoses with the thread specified by the customer.

Reference numbers from other manufacturers. It is widely used in steering systems of industrial machines and vehicles in the areas of traffic, agriculture, horticulture, forestry, construction and industry. OSPB 100 ON orbitrol is intended for the hydraulic steering of agricultural tractors, forklift trucks, excavators, combine harvesters and construction machines etc.

Dimensions can be changed slightly.

---