Hydraulic Solenoid Directional Control Valve, Double Acting, 1 Spool, 27 GPM

Hydraulic Monoblock Solenoid Control Valve, 1 Spool, 27 GPM. Hydraulic Monoblock Valves are a style of Hydraulic Control valve. These valves are used to start and stop fluid flow into hydraulic cylinders. The number of cylinders that a control valve can operate is dependent on the number of spools on a valve. The flow rate listed is the maximum allowed GPM (Gallons Per Minute) that can be put through a valve. A common example of a hydraulic control valve is the loader valve on a tractor. Operate hydraulic cylinders (Double-Acting or Single-Acting): Grapples (Tilt/Raise Cylinders), Box Blade (Height Adjustment). Install rear remotes on a tractor. Raise/Lower Dump Truck Bed ("A" Spool).

Operate Cylinders for Snow Plows ("A" Spools). All spools are double acting with spring return to neutral position, A spool is designed to control double acting cylinders. A and B ports are closed to Tank in neutral position. Precision ground and hard chrome-plated spools assure a long life.

High-tensile strength cast iron monoblock construction. SAE O-Ring ports ensure solid seal and prevent blockages. Used for open center systems (Pump to Tank Flow). Adjustable Relief Valve Range: 1500 to 3045 PSI. 12 or 24 Volt DC Solenoids. DIN 43650 3 Prong Connectors. Max Operating Pressure: P = 3045 PSI, T = 725 PSI, A & B = 3625 PSI.

Preset Pressure Relief: 2610 PSI. A & B Work Ports: #12 SAE O-Ring (1-1/16-12) Thread. Inlet Port: #12 SAE O-Ring (1-1/16-12) Thread. Outlet Port: #12 SAE O-Ring (1-1/16-12) Thread. Nominal Voltage Tolerance +/- 10%.

---