Hydraulic launch control clutch slipper solenoid valve manual transmission SWS
WS Motorsports launch control solenoid allows adjustable. Clutch engagement during launch for more consistent 60 foots, and improved reaction times. This also provides a piece of mind that allows a much smoother clutch engagement preventing drive train shock-loading that can often occur when dumping the clutch on a launch, particularly with upgraded, higher clamping load clutches. The SWS Motorsports launch control solenoid is the most compact, and most economical electronic launch control device on the market. The launch control solenoid is plumbed between the clutch master-cylinder and clutch slaver-cylinder. Fittings are 1/8 NPT and can be used with Either -AN fittings or traditional hard line. The solenoid (12v) MUST be controlled via relay if being activated by PCM/Standalone ecu. Power draw can exceed 3A and should be fused with a 5A fuse. If not using a pcm as the source, an ignition switched power source is recommended. Using a button to engage the solenoid manually during the launch is also viable.
Pairing this device with a 2-step, or RPM limiting launch control will provide the most consistent, repeatable results. Bleeding should be done with the solenoid both energized and in de-energized. Vacuum bleeding is recommended, but not required. Feel free to contact me if you have any questions! The item "Hydraulic launch control clutch slipper solenoid valve manual transmission SWS" is in sale since Saturday, October 17, 2020.
This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Other". The seller is "sws_motorsports" and is located in Lubbock, Texas. This item can be shipped worldwide.
- Brand: SwS motosports
- Manufacturer Part Number: lc-1